沙伯基础CYCOLAC ABS INP222
- 价格： ￥13/千克
- 发布日期： 2024-05-21
- 更新日期： 2025-01-16
产品详请
| 品牌 |
沙伯基础
|
| 货号 |
100
|
| 用途 |
配件
|
| 特性级别 |
增韧级|||
|
| 牌号 |
INP222
|
| 型号 |
INP222
|
| 加工级别 |
注塑级|||
|
| 品名 |
ABS
|
| 外形尺寸 |
25/kg
|
| 用途级别 |
通用级|||
|
| 生产企业 |
沙伯基础
|
| 是否进口 |
否
|
综合性能较好，冲击强度较高，化学稳定性,电性能良好。
与372有机玻璃的熔接性良好，制成双色塑件，且可表面镀铬，喷漆处理。
有高抗冲、高耐热、阻燃、增强、透明等级别。
流动性比HIPS差一点，比PMMA、PC等好，柔韧性好。
成型特性
1、无定形料，流动性中等，吸湿大,必须充分干燥,表面要求光泽的塑件须长时间预热干燥80-90度，3小时。
2、宜取高料温，高模温,但料温过高易分解(分解温度为>270度)。对精度较高的塑件,模温宜取50-60度,对高光泽.耐热塑件,模温宜取60-80度。
3、如需解决夹水纹，需提高材料的流动性，采取高料温、高模温，或者改变入水位等方法。
4、如成形耐热级或阻燃级材料，生产3-7天后模具表面会残存塑料分解物，导致模具表面发亮，需对模具及时进行清理，同时模具表面需增加排气位置。
5、强度较高，耐冲击能力强。
SABIC Cycolac系列
Cycolac BDT6500 AUTOMOTIVE. Low gloss, color concentratable for interior applications.
Cycolac MG29 Super high impact ABS. Good low temperature toughness.
Cycolac MG34LG Automotive: Low gloss ABS for unpainted interior applications.
Cycolac MG37CR High performance, injection molding ABS. Overall balance of physical properties.
Cycolac MG38 Very high impact ABS. Toughness/rigidity. Good fatigue resistance.
Cycolac MG38F Very high impact ABS. Toughness/rigidity. FDA compliant.
Cycolac MG38N Very high impact ABS. Toughness/rigidity. Good fatigue resistance. NSF Standard 61 compliant,
Cycolac MG47 Multi-purpose, injection molding ABS providing a favorable balance of engineering properties.
Cycolac MG47N Multi-purpose, injection molding ABS providing a favorable balance of engineering properties.
Cycolac MG94 Superior flow, injection molding ABS. Good impact. For thin-wall applications.
Cycolac MGABS01 Injection molding ABS. High impact, high gloss, good flow.
Cycolac BDT5510 Automotive. High heat resistance, low gloss, color concentratable for interior applications.
Cycolac X11 Automotive: High heat resistance. Excellent flow/impact balance. UL94 HB rated. High gloss.
Cycolac X15 Automotive. Very high heat resistance with high impact. UL94 HB rated. High gloss.
Cycolac X17 Automotive: Very high heat resistance with high strength and modulus. UL94 HB rated.
Cycolac X37 ABS, injection moulding, high heat grade.
Cycolac Z48 Automotive. Very high heat resistance with medium impact and good strength properties.
Cycolac FR25UHF ABS, Flame Retardant, Flame retardant, High Flow,
Cycolac EX39 Highest impact extrusion ABS for sheet and blow molding applications.
Cycolac EX39F Highest impact extrusion ABS for sheet and blow molding applications.
Cycolac EX58 High impact ABS for sheet extrusion and blow molding applications.
Cycolac FR15 Flame retardant ABS (non-PBBE additive). Good property/toughness.UL94 V-0/5VA rated.
Cycolac FR15U Flame retardant ABS. Excellent indoor UV properties.UL94 V-0/5VA rated.
Cycolac FR23 Flame retardant ABS (non-PBBE additives). Good properties/toughness.UL94 V-0 rated.
Cycolac FR30U Flame retardant ABS. Good indoor UV properties.V-1/V-0/5VB rated.
