SABIC PPcompound 15T1030高模量30%TD增强

Density	1.15	g/cm?	*** 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	6.0	g/10 min	*** 1133
Molding Shrinkage 1 (24 hr, 3.20 mm)	1.1	%	Internal Method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Injection Molded)	3200	MPa	*** 527-1/1A
Tensile Stress			*** 527-2/1A
Yield, Injection Molded	32.5	MPa
Break, Injection Molded	25.0	MPa
Tensile Strain (Break, Injection Molded)	15	%	*** 527-2/1A
Flexural Modulus 2 (Injection Molded)	3500	MPa	*** 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C, Injection Molded)	3.0	kJ/m?	*** 179/1eA
Notched Izod Impact Strength			*** 180/1A
-20°C, Injection Molded	2.0	kJ/m?
0°C, Injection Molded	2.5	kJ/m?
23°C, Injection Molded	3.0	kJ/m?

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load 3 (0.45 MPa, Unannealed)	125	°C	*** 75-2/B
Vicat Softening Temperature 3	150	°C	*** 306/A
CLTE - Flow
-30 to 30°C	5.0E-5	cm/cm/°C	ASTM D696
23 to 80°C	9.0E-5	cm/cm/°C	ASTM D696
-30 to 100°C	6.8E-5	cm/cm/°C	*** 11359-2

Additional Information	Nominal Value	Unit	Test Method
Filler Content	30	%	Internal Method